R-22 ReCharge Kit with UV Dye for Detection & Sealant
R-22 ReCharge Kit with UV Dye for Detection & Sealant
  • Load image into Gallery viewer, R-22 ReCharge Kit with UV Dye for Detection & Sealant
  • Load image into Gallery viewer, R-22 ReCharge Kit with UV Dye for Detection & Sealant

R-22 ReCharge Kit with UV Dye for Detection & Sealant

Regular price
$289.99
Sale price
$289.99
Regular price
$329.00
Sold out
Unit price
per 
Shipping calculated at checkout.

1 - R-22 ReCharge Tank, 1.9lbs, contains Sealant & UV Dye

1 - Charge Gauge/Hose

Please Note, No Directions are included at this time.

This is expensive refrigerant, please handle with care, be safe and make sure you are familiar with reCharge process, very similar to my 410a ReCharge Videos, but pressures are different. Always wear eye protection and gloves.

Recharging with R-22 — older systems designed for R-22 that blow warm, ice up, or run constantly are often low on charge. This kit includes R-22 refrigerant with UV dye to help spot leaks, plus leak sealant. Rule of thumb: if your system is not heating or cooling properly, assume the charge is about half empty — check your unit's nameplate for the refrigerant type and charge weight before ordering, and size your order to it. Example: if your nameplate charge is 120 oz and the system isn't heating or cooling properly, figure it's sitting near 60 oz — you'd need roughly 60 oz more, which is 2 bottles at about 30 oz each. For R-22 systems only.

Professional use notice: Under U.S. EPA regulations (Section 608), refrigerant may be added to or removed from an appliance only by an EPA-certified technician. This product is sold for use by, or under the direct supervision of, a certified technician. Follow all federal, state, and local regulations and the manufacturer's safety instructions when handling refrigerant.